Hardwood Floor Recoating Omaha | UV-Cured Floor Finish

What Is Hardwood Floor Recoating?

Hardwood floor recoating renews the existing finish on your floor rather than sanding it down to bare wood. It is not the same as full sanding and refinishing. When the wood underneath is structurally sound and only the finish is worn, a recoat restores protection and sheen while extending the usable life of your existing floor — at a lower cost and with far less disruption.

Also called screening and recoating or buff and coat, the process deep-cleans the floor, mechanically abrades the current finish to create a bondable surface, and applies a fresh protective topcoat. When we use a UV-cured coating, professional UV light cures the finish on contact, which can significantly reduce cure time, dust, odor, and closure time. It's a great fit for Omaha homes, offices, retail spaces, rental properties, medical facilities, and other commercial environments.

Not every floor is a candidate for recoating, so a professional evaluation determines whether recoating or full refinishing is appropriate. And because we favor low-VOC, UV-cured and GreenGuard-certified water-based coatings, recoating is also a healthier choice for your indoor air quality.

UV floor coating for better indoor air quality

Same-Day UV-Cured Hardwood Floor Recoating

Three reasons Omaha homeowners and businesses choose UV-cured recoating

Put Your Furniture Back the Same Day

Our UV-cured coatings harden the instant professional UV light passes over them. Instead of waiting days for a traditional finish to cure, you can return rugs and furniture and walk on the floor the same day we finish — often within hours — and avoid the extended cure period of traditional finishing.

No Toxic Fumes or Heavy Dust

Recoating avoids the heavy sanding of full refinishing, so it produces minimal sanding dust. Our UV-cured coatings contain zero solvents and give off no chemical odors — just 30 to 50 grams per liter of VOCs, compared with about 500 g/L for oil-based polyurethane.

Minimize Business Downtime

Because a UV-cured floor is ready to use immediately after curing, commercial recoating is designed to reduce closure time and keep operations moving. Reopen faster and avoid the extended curing delays associated with traditional refinishing.

UV Recoating vs. Traditional Refinishing

The right service depends on the condition of your floor. Here's how UV-cured recoating compares with traditional polyurethane refinishing.

Category	Traditional Polyurethane Refinishing	UV-Cured Recoating
Typical project length	Several days	Often completed in one day
Surface preparation	Full sanding to bare wood	Deep cleaning and mechanical abrasion
Dust	Significant sanding dust	Minimal sanding dust
Furniture return	Extended wait period	Typically the same day, after UV curing
Foot traffic	Gradual cure period	Ready to walk on once UV-cured
Odor and VOCs	Stronger odor; ~500 g/L (oil-based)	Zero solvents, no chemical odor; 30–50 g/L
Cure method	Air and chemical curing	Professional UV light curing
Business downtime	May require extended closure	Designed to reduce downtime
Best use	Deep damage or severe finish failure	Worn finish with sound wood underneath
Durability	Traditional finish system	Up to 3× the durability of water-based, air-cured coatings
Slip resistance	Varies by finish	Anti-slip option rated 10 (meets ADA recommendations)
Antimicrobial option	Product-dependent	Available (ProCoat RadCoat Rx, tested to JIS Z2801)

The correct service depends on the condition of the floor. Deep scratches into bare wood, water damage, cupping, discoloration, or extensive finish failure may require full sanding and refinishing.

Our Four-Step Hardwood Recoating Process

A proven process that renews your finish and prepares it for a durable new topcoat

1. Deep Cleaning

We remove dirt, oils, residue, old polish, and maintenance-product buildup so the new coating can bond properly to the existing finish.

2. Mechanical Abrasion

We mechanically abrade the existing finish with the correct grit and equipment for your floor, creating a bondable surface for the new coating.

3. UV Topcoat Application

We apply a compatible UV-cured topcoat system, following the manufacturer's specifications for a smooth, protective finish.

4. UV Light Curing

Professional UV-curing equipment cures the finish on contact. The floor is ready for foot traffic and furniture the same day, eliminating the extended cure period of traditional finishes.

Who Benefits From Hardwood Floor Recoating?

Recoating is a practical, lower-disruption way to keep hardwood floors looking their best.

Pet Owners

Renew a finish worn by claw marks, traffic patterns, and surface scratching, and get back to normal household life quickly with less need for extended boarding or relocation. Deep gouges into the wood may still call for refinishing.

Families & Busy Households

Enjoy less disruption and a faster return to normal activity than a full refinishing project, with reduced downtime for busy schedules.

Real Estate Agents & Home Sellers

Refresh floors before listing, improve appearance before showings, and prepare for closing with a fast turnaround.

Property Managers & Multi-Family Housing

Speed up unit turnover, reduce vacancy time, and refresh floors between tenants while maintaining your existing hardwood assets.

Retail Stores & Showrooms

Maintain appearance under high foot traffic and reduce closure time with a fast return to service.

Corporate Offices

Schedule around your operations for reduced disruption, faster reopening, and a professional appearance.

Dental & Medical Offices

Benefit from verified low-VOC performance and reduced downtime, with antimicrobial coating options (ProCoat RadCoat Rx) available where appropriate for sensitive environments.

Residential Hardwood Floor Recoating

Preserve the hardwood you already have instead of automatically sanding it down. Recoating renews the finish in the busiest parts of your home and protects the wood underneath, extending the life of your floors.

Living rooms and dining rooms
Kitchens and hallways
Entryways and stairs
Bedrooms

Older hardwood floors
High-traffic household areas
Homes preparing for sale
Homes with pets and busy families

Recoated residential hardwood floor in an Omaha home

Commercial Hardwood Floor Recoating

Keep your business open and looking its best. UV-cured recoating is designed to reduce downtime, speed reopening, and preserve existing flooring — avoiding the cost and disruption of unnecessary replacement.

Retail stores and boutiques
Showrooms and offices
Medical and dental practices
Apartment buildings

Property management companies
Multi-family housing
Verified durability and slip resistance
Antimicrobial options where documented

Commercial hardwood floor recoating in Omaha

Is Recoating Right for Your Floor?

Not every floor is a candidate. A professional evaluation confirms the best option for your floor.

Recoating May Be Appropriate When

The finish is dull or worn
The floor has light surface scratches
The wood is not deeply damaged
The existing finish remains compatible
The floor needs renewed protection
You want to extend finish life and avoid unnecessary full sanding

Full Refinishing May Be Required When

Scratches extend into bare wood
There is severe discoloration or water damage
The floor is cupped
The finish is peeling or failing extensively
There are deep gouges
The existing coating is incompatible or the wood needs repair

Schedule a floor evaluation to determine whether recoating or full refinishing is the better option.

Schedule a Floor Evaluation

Hardwood Recoating Across the Omaha Area

Many Omaha homes and businesses have existing hardwood floors that are structurally sound but showing their age — dulled by seasonal wear, high-traffic use, and years of cleaning. Recoating preserves those floors and renews their protection without the disruption of a full sand-and-refinish, which is especially valuable during property turnover, home listings, and times when a business can't afford to close.

We provide hardwood floor recoating throughout Omaha and surrounding communities, including Bellevue, Papillion, La Vista, Elkhorn, Gretna, Ralston, and Bennington. A recent recoating project in Bellevue is a good example of how quickly a worn finish can be renewed and returned to use. If your floors have good wood underneath a tired finish, recoating is often the smartest first step.

The Low-VOC Advantage of UV-Cured Coatings

There's no earthly reason to choose an oil-based polyurethane finish for a recoat job, period. Not only does an oil-based finish need 10 hours to dry between coats, but it also stinks to high heck and off-gases toxic VOCs into your home's air for weeks after application, to the tune of an astonishing 500 grams of VOCs per liter. For a recoat job, a UV-cured or GreenGuard-certified water-based finish is a healthier, more modern choice than oil-based polyurethane, and we're happy to explain the difference during your evaluation.

Until about 10 years ago, UV-curing wasn't even an option for hardwood floor coatings, even though the technology was widely used in dentistry, automotive painting, and other industries. Back then, your best choice for coating a hardwood floor was a standard two-part, water-based finish, which, at 275 grams per liter of VOCs, is far better for your health. Water-based coatings are still widely used today. When you don't choose a UV-cured recoat, we use a two-part, water-based coating that's GreenGuard-certified for low VOC emissions.

But why even opt for a water-based finish when you can get a UV-cured floor coating? UV coatings contain zero solvents. They give off no chemical odors. And they contain just 30 to 50 grams per liter of VOCs. Omaha Floors is proud to use ProCoat UV products, which are made in the USA and provide unmatched protection for your vinyl or hardwood floors. ProCoat invented the technology behind UV-cured floor coatings, and their products are the pinnacle of environmentally friendly and health-conscious finishes.

Benefits of UV-Cured Hardwood Floor Recoat

UV-Cured Floor Coatings Cure Instantly

A considerable amount of damage can be done to a hardwood floor while you're waiting the typical seven days for a water-based coat to cure. Until it's completely hardened, a curing floor is extra susceptible to scratches from pet claws, sliding furniture, shoes, and rugs. By contrast, a UV coating cures fully the instant the UV light makes contact. As soon as we pack up our equipment and leave, you can put down your rugs, bring in the furniture, and even walk on your floor in heels.

UV Floor Finishes Are Ultra-Durable

ProCoat's RadCoat cures in the blink of an eye. Just like that, your hardwood floor has maximum durability. In fact, UV cured floors enjoy three times the durability of a water-based, air-cured coating. That means you can go longer between recoats, and your floor will ultimately last longer.

UV Finishes Are Crystal Clear

Oil-based polyurethane finishes are almost guaranteed to yellow over time. UV rays from the sun speed up this yellowing and can even make your floors appear orangish. Water-based coatings yellow far less, although if your contractor uses a cheap waterborne finish, it will yellow far faster than a high quality coating. But UV-cured finishes simply don't yellow over time (although in some cases, the wood might) and this means you'll be less likely to need to have your floor sanded and refinished down the road.

Some UV-Cured Finishes Are Antimicrobial

ProCoat Radcoat Rx is one of our favorite products. It's the first of its kind, and it's made in small batches by ProCoat using zinc-based antimicrobial technology. Not only is RadCoat Rx the most durable UV-cured finish on the market, but it also inhibits the growth of bacteria. You'll still need to clean your floors, of course—and it's always best to remove your shoes at the door—but your floors will stay cleaner longer. And you'll feel a lot better about the five-second rule.

Ready for a Recoat?

If your hardwood floors are looking worse for the wear, a recoat can restore sheen and shine. A UV cured finish for your hardwood or vinyl floor means that you can move back into your rooms within hours. When you choose Omaha Floors for a recoat, you're choosing the best products, the latest technologies, and the highest level of expertise in the Omaha area. Locally owned and operated, Omaha Floors always has your best interest—and the best interest of your floors—at heart.

Get Free Estimate

Professional UV recoating machine in action

Recoating Options We Offer

Omaha Floors provides expert hardwood and LVT recoating across the greater Omaha area. We take the time to make sure your recoat is done right, with high-quality materials matched to your floor.

A recoat is the way to go if you want to return your worn flooring to its original luster. A recoat will make your hardwood floors look smooth and glossy again – and at a lower cost than a refinish.

With all the different types of recoating products available for hardwood, LVT, and engineered flooring, it can be tough to decide which is the best for your floors — at home or at work — but we can help. We use only the highest quality finishes, and we offer a variety of custom options to fit the needs of the floor — and the people who walk on it.

These are some of the types of recoats we do — and how we match the right recoat to your floor.

Water-Based Recoat for LVT, Engineered, and Hardwood Floors

If you're looking for a no-frills recoat, our low-VOC, water-based polyurethane over your existing coat will give your floor a "like new" look and feel.

For a water-based recoat, we buff the existing coating to ensure the new coat forms a strong, seamless bond with it. However, if you've used wax or oil soap to maintain the floors, there's a good chance that a new polyurethane coat won't stick without some special prep. We've seen it all, and we'll identify potential recoat problems and come up with a solution for unique flooring situations.

UV-Cured Recoat for Residential and Commercial Floors

UV-cured recoating is the cream of the recoat crop. Once this instant-cure coating is hit with UV light from our state-of-the-art machine, it's ready to walk on. For a commercial UV recoat, that means nearly zero downtime for your business.

UV-cured recoating is one of the specialties that sets Omaha Floors apart in the greater Omaha area, with a quick turnaround that returns your floor to use fast. For commercial UV recoats, we can take it a step further and add an aluminum oxide additive that makes the coating about 40% stronger — delivering better protection for your flooring and more time between recoats.

LED-Cured Recoat

LED-cured coatings harden as soon as they're hit with LED lights. Unlike other coatings that sit on top of the floor, LED-cured coatings deeply penetrate hardwood floors, protecting them from the inside out. The special blend of natural waxes and oils that make up LED-cured coatings protect against moisture and stains and give hardwood floors a warm, matte finish.

Anti-Slip Recoating

Slippery floors are a concern for businesses, nursing homes, medical facilities — and even homeowners. The solution? An anti-slip recoat will keep you on your feet until it's time for the next recoat.

Omaha Floors is dedicated to using only the best coatings, so we use Bona Traffic Anti-Slip, which has a slip resistance rating of 10 and meets ADA recommendations for accessible routes and ramps.

Antimicrobial Recoating

LVT flooring is an increasingly popular choice for hospitals and long-term living facilities. For these environments we offer a medical-grade antimicrobial coating, ProCoat RadCoat Rx, which the manufacturer describes as the first evidence-based antimicrobial floor coating of its kind.

Radcoat RX has been tested with the global standard testing method JIS Z2801 and found to inhibit the growth of harmful microorganisms on the floor. And it's not just for hospitals! An antimicrobial recoat can reduce contaminants that affect your home's air quality to help keep you and your family healthy.

Omaha Floors Can Even Recoat Textured Floors!

The ability to recoat textured floors is something many companies can't offer. We use a 10-step process developed and refined over many years. If you have textured flooring that other companies have said could not be recoated, contact us for a second opinion.

Why Choose Omaha Floors for Recoating

We're Innovative

Here at Omaha Floors, we pride ourselves on our innovative thinking, problem-solving skills, and cutting-edge technology. We helped bring UV recoat technology to the greater Omaha area and offer specialized services many local companies don't.

We're Dedicated

Have you seen our recoat van around Omaha? That's right — we have a van dedicated to our recoating services for LVT, hardwood and engineered floors. It's packed with everything we might possibly need to make your flooring better than new.

We Believe in Quality

You know the saying, "you get what you pay for?" It holds true for hardwood and LVT recoating. We use high-quality recoat materials so you get durable, lasting results.

We're Experienced

Omaha Floors brings 28 years of hands-on experience in commercial wood flooring installation, refinishing, and recoating. We really have seen it all, and we have the detailed knowledge and specialized skills to turn your old, worn floors into the beautiful floors your home or business deserves.

Whatever type of recoat you need, Omaha Floors is a dependable choice for a job done right. We're your friendly, locally owned experts in hardwood, engineered, and LVT flooring, using modern equipment and advanced coatings to help your floor last for years to come.

Contact Us for a Free Quote

How Often to Recoat, What It Costs & How to Care for Your Floor

Straight answers for Omaha homeowners weighing a recoat.

How Often to Recoat

Most hardwood floors benefit from a recoat every 2–5 years, depending on traffic. Entryways, kitchens, and hallways wear fastest. Recoating on schedule keeps wear on the finish — not the wood — so you avoid the cost and disruption of a full refinish.

What Recoating Costs

Because recoating preserves your existing finish instead of sanding to bare wood, it typically costs far less than a full refinish — often about half. Exact pricing depends on square footage, floor condition, and coating options, so we provide a free, no-obligation estimate.

Caring for Your Floor

Use felt pads under furniture, place walk-off mats at entries, dust-mop regularly, and clean with a pH-neutral hardwood cleaner (never water or vinegar). Wipe spills promptly. With routine care and a recoat every few years, your floors can last for decades.

We recoat hardwood floors across the Omaha metro — including Elkhorn, Papillion, Bellevue, La Vista, Gretna, Ralston, Bennington, and Council Bluffs.

Hardwood Floor Recoating FAQs

Answers to common questions about UV-cured recoating in Omaha

Recoating renews the existing finish on your floor. We deep-clean the floor, mechanically abrade the current coating to create a bondable surface, and apply a fresh protective topcoat — without sanding the floor down to bare wood.

Full refinishing sands the floor to bare wood to remove deep damage or change color. Recoating preserves the existing finish and is appropriate when the wood is structurally sound and only the finish is worn.

No. Recoating is appropriate when the finish is worn but the wood is sound and the existing coating is compatible. Floors with scratches into bare wood, water damage, cupping, or peeling finish typically need full refinishing. A professional evaluation confirms which is right.

Many UV-cured recoating projects are completed in a single day. Because the coating cures the instant it is exposed to professional UV light, there is no multi-day wait for the finish to harden.

With UV-cured coatings, the floor is cured the moment the UV light passes over it, so you can typically walk on it and return furniture the same day, once our equipment is packed up.

Recoating avoids the heavy sanding of full refinishing, so it produces minimal sanding dust. Surface preparation uses deep cleaning and mechanical abrasion rather than sanding to bare wood.

UV-cured coatings contain zero solvents and give off no chemical odors, at just 30 to 50 grams per liter of VOCs, compared with about 500 g/L for oil-based polyurethane.

Yes. UV-cured recoating suits retail, offices, medical and dental practices, and multi-family housing because it is designed to reduce downtime and return floors to use quickly.

Yes. We offer anti-slip options (Bona Traffic Anti-Slip, slip-resistance rating of 10, meeting ADA recommendations for accessible routes and ramps) and antimicrobial options (ProCoat RadCoat Rx, tested to JIS Z2801) where appropriate.

Schedule a floor evaluation. If the wood is sound and the finish is simply worn, recoating is usually the better, lower-cost option. If there is bare-wood damage, water damage, cupping, or failing finish, full refinishing may be required.

Most hardwood floors benefit from a recoat every two to five years, depending on how much traffic they see. Recoating on schedule protects high-traffic areas before wear reaches the bare wood, extending the life of the floor and helping you avoid a full refinish.

Because recoating preserves your existing finish instead of sanding to bare wood, it typically costs significantly less than a full refinish — often about half. Final pricing depends on square footage, floor condition, and coating options, so we provide a free, no-obligation estimate.

We recoat and service hardwood floors across the Omaha metro, including Elkhorn, Papillion, Bellevue, La Vista, Gretna, Ralston, Bennington, and Council Bluffs, with a dedicated Omaha service route at least once a week.

Related Services

Hardwood Floor Maintenance

Keep floors ready to recoat with professional deep cleaning.

Hardwood Floor Cleaning

Refinishing & Installation

When a floor needs more than a recoat, we sand, refinish, and install.

Restore Worn Hardwood Floors

See Our Work

Browse recent Omaha projects and hardwood transformations.

Recent Projects

Omaha Floors is the dedicated Omaha-area recoating and hardwood flooring website of Lifetime Hardwood Floors. Same team, same 28 years of experience, same phone number: 402-957-3919.

Request an Omaha Recoating Estimate

Tell us about your floor and we'll help you decide between recoating and full refinishing

Contact Information

Phone

+1 402 957 3919

Email

trevorhayden76@gmail.com

Service Area

Omaha metro — Elkhorn, Papillion, Bellevue, La Vista, Gretna, Ralston, Bennington & Council Bluffs

Your Name

Email Address

Phone Number

Property Type

City

Service Interested In

Existing Floor Type

Approx. Square Footage

Desired Timeframe

Main Floor Concern / Project Details

Hardwood Floor Recoating in Omaha